loading

Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  > 

electrommunication siemens electronics electronic parts Euromicron Mould Brand

electrommunication siemens electronics electronic parts Euromicron Mould Brand

electrommunication siemens electronics electronic parts Euromicron Mould Brand
  • electrommunication siemens electronics electronic parts Euromicron Mould Brand
  • electrommunication siemens electronics electronic parts Euromicron Mould Brand
  • electrommunication siemens electronics electronic parts Euromicron Mould Brand
  • electrommunication siemens electronics electronic parts Euromicron Mould Brand

electrommunication siemens electronics electronic parts Euromicron Mould Brand

Product Name
Electronic connector
Product size
35*29.5*26mm
Material
PA9T30GF
Cavity
1*4
Cycle time
40S
Customer
Bitron
Export
Italy
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
The injection mold produced by Euromicron is of high quality and is widely used in the Manufacturing Industrial Parts Moulds industry.Euromicron always pays attention to customers. According customers' actual needs, we could customize comprehensive and professional solutions for them.Euromicron has strong technical force, mature equipment manufacturing technology and complete management system. We can continuously provide high-quality cnc service for customers.
Company Advantages
1. electronic parts is a popular product in the market now which is processed with precision molded plastics. The product is mainly exported to Europe and North America
2. plastic enclosure as an environmentally friendly product has been accepted by more and more consumers. With the development of science and technology, the product is upgraded quickly
3. Many customers are greatly impressed by its optimal performance and superior quality. Its design is supported by the professional project engineers who follow up the specific progress
4. Euromicron Mould Engineering Limited's design team will analyze the feasibility and cost of your customized project. The product is capable of withstanding high torque


This connector was supposed to be molded in glass-fiber-reinforced,flame-retardant nylon.
It came with size 35X29.5X26mm,with 40pcs pins in center.High rib,hooks and boss on round side.One four cavity mold should employ a mold base dimension 250*230mm,with 280mm height.Steel grade 1.2767 is used for the mold inserts,while grade 1.2312 is employed for mold plates as well as the ejector plate.Steel grade 1.1730 is mused for remaining plate and rails.Thermal insulating plates,which are available in sizes to match the standard mold plates,serve to insulate the mold from the machine platens.



◇◆ Mold design


This part is simple,but need to ensure 40pcs pin locate properly when plastic filling,specially under high pressure flow.To save production cost,we need to cut down cycle time.So two or three even more over-mold inserts need.Injection machine operator no need to set pin one by one into mold.Just need to set in additional insert before molding.When mold open,just need put whole insert with pin into core.Of course,operator need to take part with insert together.The hooks on both sides are undercut,need design for slider or angle lifter.But no slider split line allow in middle surface.So split line should be set on radius of corner.

The molded part is ejected via knockout pins.In addition to providing for ejection.these pins serve to vent the cavity during filling.It is in part for this reason that the knockout pins are located beneath ribs and other deep section of the part.where entrapped air is to be expected.The mold filling pattern during injection of the molding compound as well as the mechanical and thermal aspects of the mold design were simulated and established during the design phase with the aid of appropriate computer programs.



Company Features
1. Euromicron Mould Engineering Limited currently has been growing into a highly acknowledged electronic parts manufacturer.
2. plastic enclosure is processed with sophisticated technology and precision molded plastics.
3. Euromicron Mould has a great goal to be a booming plastic prototype supplier. Call!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Leave Your Message inputting...