loading

Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  >  corporation electronic parts customized for electronic components
corporation electronic parts customized for electronic components

corporation electronic parts customized for electronic components

Part Name
switch
Part size
92.8*61.2*8.6mm
Raw Material
ABS
Color
RAL9010,White
Mould Cavity No
1*4
Injection gate
Cold runner with sub gate
Surface finished
Polishing #600
Company Advantages
1. There is a very broad development prospect of electronic parts owing to its plastic electrical enclosures design. The product is easy to assemble and maintain
2. This product brings people more than just the coolness of the water but also it can alleviate the summer irritability. The product has an output of 50 sets per month
3. Featuring flame spread resistance, this product meets the fire codes. Fire retardant has been added to its material during the production to enhance its anti-fire capacity. Its manufacturing meets the international quality standards



◇◆ Product parameters


Part Name:switch
Part size:92.8*61.2*8.6mm
Raw Material:ABS
Color:RAL9010,White
Mould Cavity No.:1*4
Injection gate:Cold runner with sub gate
Surface finished: Polishing #600
Core &Cavity steel:M310,hardness 52~55HRC
Mold component standard:DME or equivalent
Injection machine size:250T
Cycle time:35S
Mold life:300000 shots
Customer:Siemens
Export:Uruguay


◇◆ Summary for project running
This product used for electrical appliance,the light switch.Plastic raw material need in inflaming retarding and heat resistant.

We carried out first trial shot on 35th day,twice trial shots for samples production,and finished whole project in 45days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request. Due to many thin and high side ribs,part stick on core side tightly.Mold need smooth polishing and need enough ejection pins and as big as possible.Sink mark problem on surface easily to cause,due the part thickness is too thick and not equal,we solved it by adjusting injection parameter.Four hooks distance need to be molding in high precision location,Because they will assemble to bottom shelf.To make it work well,we cut material at first trial shot.After checking first samples,made correction to mold.So that the secondary samples met assembly requirement.

Another problem we met on first trial shot was the ribs short shot.Because they were very thin and high,plastic filling easily to get cold when injection.Later we had a discussion,decided to change the side gate to two sub gates,change core cooling water to hot oil,100℃,and add injection pressure,so that filling time shorten a lot,finally we got excellent part. This experience also can apply to similar product with thin and high ribs.



Company Features
1. Euromicron Mould is prominent in the electronic parts industry for its top quality and plastic electrical enclosures .
2. We have personnel that is experts in product creation. They are accustomed to multi-disciplinary approaches in manufacture. Being fast, professional, competent, and knowledgeable, they allow us to provide the best.
3. Presenting your needs, Euromicron Mould will satisfy you best, the customer is God. Get info!
Chat Online 编辑模式下无法使用
Leave Your Message inputting...