Euromicron Mould Engineering Limited was found in 1995

Euromicron Mould  > 

AI - Page Sitemap

 > 

citroen injection auto parts source now for businessman Euromicron Mould

citroen injection auto parts source now for businessman Euromicron Mould

Citroen injection auto parts source now for businessman Euromicron Mould

Product Name
Auto door plastic part
Product size
717*119*50mm
Material
PC+ABS
Cavity
L+R
Cycle time
45S
Customer
Nissan
Export
Janpan
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
die casting mold is in line with the stringent quality standards. The price is more favorable than other products in the industry and the cost performance is relatively high.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Compared with other products in the same category, die casting mold has the following competitive advantages.
Product Details
Next, Euromicron will present you with the specific details of injection mold.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron pays great attention to integrity and business reputation. We strictly control the quality and production cost in the production. All these guarantee injection mold to be quality-reliable and price-favorable.
Company Advantages
1. The designs and colors of auto body molding are injection auto parts , which presents the personality and style.
2. The product can be used for a long time. Its mechanical components are sturdy enough to wear over time and require little maintenance within its service life.
3. The product features a clean appearance. It is coated with a special layer to effectively prevent adhesion of dust or oil smoke when being placed.
4. Adopting the technical method makes auto body molding more practical and applicable in this industry.


This trail mold was used to injection Auto door plastic part in different thermoplastics, such as  PC/ABS blend and modified PA, elastomer-modified PC, PC/PBTP blend and modified PBTTB for a number of manufacturing companies.
The two-cavities mold for Auto door plastic part consists essentially of sprue half with the hot runner system and the ejector mold half. Pillars and bushings serve to guide the two mold halves. When the mold is closed. The mold halves are fixed relative to each other via angled surfaces and wear plates.
Gating and temperature control. The molding compound passes through a sprue bushing into the hot runner made of steel (material number 1.2311). From four heated nozzles, also of steel (material number 1.2162), it passes through cold feed channels to the various gates of the mold cavity. The gates measure 15 mm X 1.2 mm.

citroen injection auto parts source now for businessman Euromicron Mould-1

The hot runner manifold block is heated by cartridge heaters which are pressed against it by laterally bolted cover strips. The distributor lies in a recess of the feed-side mold plate and is pressed by the hot runner covering plate against the nozzles via spacer rings. Guide components prevent the manifold from twisting about the locating device. They also allow the manifold to expand and contract during heating and cooling. The hot runner nozzles are each centered in their locator bores in mold plate by means of three contact surfaces in such a way that they do not experience the expansion and contraction undergone by the manifold. The contact surfaces facing the manifold are convex. Transfer areas for the molding compound are sealed with steel O-rings. The ends of the hot runner nozzles on the mold side have conical bores. In this region. Their exteriors fit snugly into the mold platen to ensure good thermal conduction and thus rapid cooling of the sprue formed therein.

On mold opening, the frozen sprue separates from the hot melt in the manifold at the narrowest point of the conical bore. The nozzles are heated with heating collars. Two temperature probes are attached to each nozzle to monitor and regulate the temperature. The cartridge heaters in the manifold are arranged in seven groups, each of which is individually regulated. The cartridges have an installed rating of about 40 KW.
The melt pressure in the manifold is registered by pressure sennsor P. and that in the cavity, by sensor P. and cann therefore be used for control purposes. The temperature-control system consists of a network of bores in the two mold hales. Heat sensors T measure the temperature in the mold.
Ejection of the Auto door plastic part
When the mold opens, the molded part remains in the moving half. The sprues are also held in place by sprue pullers above the ejector pins. As soon as the stripper plates are pushed forward by the ejector of the machine, the ejector pins push the molded part along with the sprues from the mold core. On mold closing, the ejector plates and thus also the ejector pins are pushed back by ejector-plate return pins. The mold plate is supported by rolls projecting right through the ejector plates to the clamping plate.



Company Features
1. Euromicron Mould Engineering Limited specializes in injection auto parts fabrication. We have merged our extensive capabilities to produce our range of well-crafted products.
2. Euromicron Mould Engineering Limited insists on researching and developing new products.
3. We never change our persistence in only producing high quality auto body molding . Please contact us! Euromicron Mould Engineering Limited's mission is to provide high an-performance and cost effective car moulding . Please contact us!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...