Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Hot Automobile  > 

Car seat accessories of the auto parts Seat belt buckle

Car seat accessories of the auto parts Seat belt buckle

Car seat accessories of the auto parts Seat belt buckle

Product Name
Seat belt buckle
Product size
145*55*33mm
Material
ABS
Cavity
1*4
Cycle time
38S
Customer
Honda
Export
Japan
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Euromicron's die casting mold is of exquisite workmanship, which is reflected in the details.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods. die casting mold has the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to the market demand.
Company Advantages
1. The controls and tests Euromicron Mould [拓展关键词 are carried out in line with the procedures and guidelines approved by the rubber and plastic industry.
2. Being high quality and cost competitive, plastic injection mold making of Euromicron Mould will surely become a highly marketable commodity.
3. automotive plastics produced by our company has the advantage over the others on plastic injection mold making .
4. Due to its excellent characteristics, this product is well received by customers and is used more and more in the market.




◇◆ Product Features


According to customer's requirement, the mold was designed into 4 cavities mold. It was cooled by cold water. The part was foldable box. The concave shape of the cover was designed in the cavity side of the mold. In that case, the cover was easy to stick in the cavity side when opening the mold. The part should be damaged and deformed.


To solve the problem, we designed a ejecting system in the cavity side of the mold. The ejecting system was actuated by two hydraulic cylinder. In this way, the cavity side was too thick. And the sprue was very long. It was bad for injecting. The cycle time of production increased. And more plastic material was wasted. The cost was increased a lot. So we suggest customer to add a hot runner system in the mold.

The tip gate of the hot nozzle was directly on the part. So no plastic material was wasted on the cold runner and the cycle time was short. It was about 38 seconds. The link connected cover and frame, which's thickness was very critic. If it too thick, it was hard and very difficult to fold it. If it was too thin, it was difficult to fill full when injecting. And it was easy to break during in use. Also its lifetime was short. It can't meet the requirement of the part.

To reach it, we adjusted the dimension of the link and did trail three times. Through continuous optimization, it worked very well finally. The mold was delivered to customer on time. The customer was very satisfied with the quality of the mold.



Company Features
1. Euromicron Mould Engineering Limited has always been an industry leader in the fierce competition.
2. The technology which is applied in manufacture automotive plastics process is introduced from abroad.
3. Attaching great importance of the customer service is essential for the development of Euromicron Mould. Check it! Euromicron Mould Engineering Limited will continue to provide superior car body parts performance to customers for many years to come. Check it!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...