Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Electrommunication For sell  > 

by siemens electronic parts electrommunication Euromicron Mould

by siemens electronic parts electrommunication Euromicron Mould

by siemens electronic parts electrommunication Euromicron Mould
  • by siemens electronic parts electrommunication Euromicron Mould
  • by siemens electronic parts electrommunication Euromicron Mould
  • by siemens electronic parts electrommunication Euromicron Mould

by siemens electronic parts electrommunication Euromicron Mould

Part Name
Gateway
Part size
175*136*32mm
Raw Material
ABS+PC
Color
RAL9010,Whit
Mould Cavity No
1*1
Injection gate
Hot runner with pin point gate
Surface finished
Mirror Polishing
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Euromicron's cnc service is perfect in every detail.Euromicron has advanced production and testing equipment, rich manufacturing experience and strong technical force. All this provides a strong guarantee for high quality of cnc service.Closely following the market trend, Euromicron uses advanced production equipment and manufacturing technology to produce cnc service. The product receives favors from the majority of customers for the high quality and favorable price.
Application Scope
The injection mold of Euromicron is applicable in the following scenes.While providing quality products, Euromicron is dedicated to providing personalized solutions for customers according to their needs and actual situations.Euromicron has excellent technology, advanced equipment and strong quality awareness. We can ensure cnc service are of high performance, stable quality and good reliability and is praised and trusted by customers.
Company Advantages
1. electronic parts's usage is ubiquitous in the field of precision molded plastics. The product stands out with its excellent dimensional consistency
2. We have added as much clever solutions and functions as possible into this product. The surface of the product adopts scratch-resistant coating
3. The defective products are eliminated through strict quality inspections. One-stop solutions are offered for the product, including design, manufacturing, and assembly
4. Euromicron Mould is a professional plastic enclosure maker which enjoys a better reputation among the customers. Fast shipment is guaranteed for the product to improve customer satisfaction
5. The quality of plastic prototype is always the thing Euromicron Mould Engineering Limited has been concerned about. It is produced in the large-scale workshops, making mass production possible


Part Name:Gateway
Part size:175*136*32mm
Raw Material:ABS+PC
Color:RAL9010,White
Mould Cavity No.:1*1
Injection gate:Hot runner with pin point gate
Surface finished: Mirror Polishing
Core &Cavity steel:1.2344,hardness 48~52HRC
Mold component standard:HASCO or equivalent
Injection machine size:180T
Cycle time:35S
Mold life:300000 shots
Customer:HEKATR@N
Export:Germany


◇◆ Summary for project running
This product used for electrical appliance,the gateway case and grid.Plastic raw material need in inflaming retarding and heat resistant.

We carried out first trial shot on 40th day,little longer than planed.Since YUDO hot runner system came out of expected date,one week late.Three trial shots for samples production,and finished whole project in 50days.Manufacture schedule,samples delivery and mold shipment date ran as planing,within customer’s request.
Both parts critical surface need in high polishing,mirror grade,no any marked or scratch allowed.When production,have to take out by robot hand,and cover PE film for protection. Silkscreen also made by EMM factory.

At first trial shot,case part came out with obvious sink mark and scratch on side surface. The ribs inside are too thick cause sink mark,and no draft angle on side surface cause scratch when mold open.Finally We cut rib material solved sink mark problem.But no draft angle allowed on side surface,we had to add two sliders on both side,to ensure all outside surface look glossy.
The grid part has many small window and only 0.6mm thick.We found flowing mark at each window corner and short shot problem at first trial shot.Then we suggested change high polishing surface to fine texture,VDI3400-33,also change injection gate location,from both side for filling.Customer confirmed and part came out look good.




Company Features
1. Euromicron Mould Engineering Limited has highly reliable electronic parts in providing high quality solutions.
2. Euromicron Mould Engineering Limited continually upgrades ourselves with the technological strength.
3. Euromicron Mould Engineering Limited will continue to listen to costumer, understand their needs, and make our plastic enclosure products perfect. Get info!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...