Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Hot Automobile  > 

buckle car moulding citroen Euromicron Mould company

buckle car moulding citroen Euromicron Mould company

buckle car moulding citroen Euromicron Mould company
  • buckle car moulding citroen Euromicron Mould company
  • buckle car moulding citroen Euromicron Mould company
  • buckle car moulding citroen Euromicron Mould company
  • buckle car moulding citroen Euromicron Mould company
  • buckle car moulding citroen Euromicron Mould company
  • buckle car moulding citroen Euromicron Mould company
  • buckle car moulding citroen Euromicron Mould company

buckle car moulding citroen Euromicron Mould company

Product Name
Auto tank
Product size
495*76*83mm
Material
PA66+30%GF
Cavity
1*2
Cycle time
41S
Customer
Mercedes Benz
Export
Germany
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
Want to know more product information? We will provide you with detailed pictures and detailed content of injection mold in the following section for your reference.Euromicron makes full use of modern quality management tools to carry out strict quality control. The cnc service are guaranteed to be of high quality and good safety.Euromicron carries out strict quality monitoring and cost control on each production link of injection mold, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the product has better quality and more favorable price than other products in the industry.
Company Advantages
1. Quality Euromicron Mould injection auto parts is manufactured leveraging the technologically-advanced production facilities. The product can be applied in many industries, such as the automobile, house appliance, and medical industry
2. Our team strictly follows the quality control systems to ensure the efficiency of this product. Company logo can be printed on the surface of the product
3. Our skilled professionals supervise the quality control throughout the production, greatly guaranteeing the quality of the product. Its manufacturing meets the international quality standards
4. The demand for this product has been increasing amongst the customers over years. One-stop solutions are offered for the product, including design, manufacturing, and assembly
5. The product is highly marketable in world markets and has high commercial value. It does not contain any toxic material and meets the requirements of environmental protection




◇◆ Product Features


The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



Company Features
1. Euromicron Mould is the perfect choice for world-renowned car moulding brands.
2. When speaking of quality, auto molding is undoubtedly overwhelming to similar products.
3. injection auto parts has become the perpetual pursuit of Euromicron Mould Engineering Limited to improve himself. Please contact us!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...