auto parts factory | Automobile

Latest products

Tee pipe coupling by injection molding

Twin-shot injection mold

Die-casting automobile of molding for Ford

Die-casting parts of molding

Product Information
Feedback

Enterprise Strength

Our excellence comes from the efforts of staff from such departments as R&D department, sales department, design department and production department. There are designers, R&D experts, and after-sales personnel in our company.
Euromicron carries out strict checks and continuous improvement on customer service. We gain recognition from customers for the professional services.
Euromicron always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
We have been dedicated to the manufacturing of cnc service for about years, and have become the leading enterprise in the industry. This enables us to introduce and operate a complete set of production equipment, and achieve intelligentization and standardization.
Since the establishment, our sales network has been continuously expanding to where our sales service is highly appraised by customers at home and abroad. In future, we would like to establish our marketing network overseas and expand the business further.

Product Details

injection mold's outstanding quality is shown in the details.The products we produce are in strict line with the . Their high quality is guaranteed through reliable material sourcing and strict QC methods.Euromicron carefully selects quality raw materials. Production cost and product quality will be strictly controlled. This enables us to produce injection mold which is more competitive than other products in the industry. It has advantages in internal performance, price, and quality.

Company Advantages
1. Apart from the traditional style of auto parts factory, injection molding manufacturing companies has also added some new effect.
2. With beautiful colors, this product can show advertisements, product descriptions, logos, etc. that will appeal to consumers in seconds.
3. The product has the desired safety when operating. It has automatic break protection from any power leakage and short circuit.
4. The product has been considered to have a wide development prospect.

Auto tank for the automobile Mercedes Benz-1

Auto tank for the automobile Mercedes Benz-2

◇◆ Product Features

Auto tank for the automobile Mercedes Benz-3

The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.

Auto tank for the automobile Mercedes Benz-4

The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

Auto tank for the automobile Mercedes Benz-5

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

Auto tank for the automobile Mercedes Benz-6

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.

Company Features
1. Euromicron Mould Engineering Limited, a competitive manufacturer of injection molding manufacturing companies , has been recognized as one of the most renowned producers in the industry.
2. Euromicron Mould Engineering Limited bases itself on independent research and development and independent innovation.
3. Euromicron Mould Engineering Limited will continue to provide professional services to each customer. Get quote! We attach great importance to the quality and service of auto parts factory.

h******h

Euromicron Mould injection molding manufacturing companies must go through the necessary tests. It will be tested in terms of insulation resistance, current leakage, and current load.

e******r

Euromicron Mould auto parts factory goes through several production stages, including the fabrication and solder of the circuit board, surface treatment, insulation testing, assembly, and commissioning.

e******x

For designing Euromicron Mould auto parts factory, different lines, curves, colors, and textures are used. These elements are blended in such a way as to make the design beautiful.

q******n

Euromicron Mould injection molding manufacturing companies is manufactured strictly complying with relevant standards. It has been tested under IEC, JISC, RoHS, CE, etc, and the testing result shows that its electrical property and safety performance meet the regulations.

o******v

The cutting process is one of the important steps in manufacturing Euromicron Mould auto parts factory. This process is focused on two things: the aesthetics and the reduction of wastage.

s******m

The product has to be subjected to stringent quality checks to ensure premium quality before shipment.