Euromicron Mould Engineering Limited was found in 1995

Home  >  Customized Application  >  Hot Automobile  > 

Auto tank for the automobile Mercedes Benz

Auto tank for the automobile Mercedes Benz

Auto tank for the automobile Mercedes Benz
  • Auto tank for the automobile Mercedes Benz
  • Auto tank for the automobile Mercedes Benz
  • Auto tank for the automobile Mercedes Benz
  • Auto tank for the automobile Mercedes Benz
  • Auto tank for the automobile Mercedes Benz
  • Auto tank for the automobile Mercedes Benz
  • Auto tank for the automobile Mercedes Benz

Auto tank for the automobile Mercedes Benz

Product Name
Auto tank
Product size
495*76*83mm
Material
PA66+30%GF
Cavity
1*2
Cycle time
41S
Customer
Mercedes Benz
Export
Germany
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Euromicron Mould injection molding in automotive industry is mainly composed of shell, cover, feed hole plug, connecting plate, connecting column, plate separator, and electrolyte. Its structure proves to be firm and stable
2. Euromicron Mould has professional technicians to attend to the work of producing auto parts company with quality guaranteed. The product stands out with its excellent dimensional consistency
3. The product has good electromagnetic compatibility. It works stably together with other devices, also it does not affect the normal operation of other electrical appliances. Vacuum packing method is adopted for the product to avoid mold rusting during transportation
4. The product has superior thermodynamic property. It is processed under heat during the production stage, hence, it can work stably under high temperature. The surface of the product adopts scratch-resistant coating
5. This product is not only humidity-resistant but also sag-resistant. It remains dimensionally stable even in a wet environment. The product has an output of 50 sets per month




◇◆ Product Features


The product is applied in the automobile Mercedes Benz. It is a part of the tank. It works in the high temperature environment. So it is made of the material PA66 with 30% glass fiber. This is a special heat-resistant material. Also it is a high strength engineering material. This composite materials have superiorities in size stability, formability, stretching resistance and impact resistance. This a long product. The length is 495mm. width is 76mm, height is 83mm. it is easy to deflect after injecting. So it is very important to solve deflect issue in the mold.


The mold is a two-cavities design with hot runner system. The valve gate of the hot runner system is directly on the part. We did mold flow analysis before mold design. Through technical analysis, we can estimate the deformation of the part and find some problems of injection molding. So that we saved some steel for late adjustment about deformation.Meanwhile, we did Some preventive measures for possible problems.

In this way, we can optimized the mold after trailing shoot until the molding was good. The structure of the part was a lot complex. There were some bosses and hooks at the side of the product. It needed several sliders to formed them. For cooling system, it was very important too. Good cooling system can decrease the deformation of the product and the cycle time. So we designed several sufficient cooling loops for this mold. Not only cooling loops were design in the core insert and cavity insert, but also cooling loops were designed in the sliders and the mold plate.

In that case, the temperature of the mold can be controlled well. And the product was very stable. The cycle time was about 41 seconds. By controlling the valves of the hot runner system, we can control the volume of each part and the balance of flowing. Because of the plastic material including 30%glass fiber, the steel of forming insert must be harden steel. We choose to use imported steel 1.2344 which hardness was about 52 HRC. The mold ran well. The mold run over 3 hours for testing before delivery to customer. Customer was satisfied the mold.



Company Features
1. Euromicron Mould Engineering Limited began by making auto parts company and quickly became one of the largest producers in China. Euromicron Mould is engages in producing high quality auto body molding .
2. Advanced equipment is basis of high product quality of car body molding in Euromicron Mould Engineering Limited.
3. Euromicron Mould Engineering Limited has a strong scientific research personnel, with rich experience and the production of innovative thinking. injection molding in automotive industry, the New Service Idea of Euromicron Mould Engineering Limited. Please contact us!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...